Tools

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

Unior, Metal plate for 1693C, Shop Repair Stand, Base plate

Set includes all the most common tools to service your bike stored in a compact plastic toolbox inside two high quality foam trays, where each tool finds its place - Three-legged hex and torx wrench of all important sizes - Screw type chain tool, master Link pliers and chain wear indicator - Tools for removal and installation of cassette - Hollow tech bottom bracket wrench - Pocket wheel truing tool and round spoke wrench - Bike brake disc spreader - Rotor truing fork - Steel wire cutter - Flat and PH screwdriver - Set of two tire levers

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.

You know that $300 carbon bar you just bought? Don't guess when installing it. Know exactly. Topeak's D-Torq is a precision digital torque wrench made from hardened steel. It features an audible alarm when you start to over tighten. The reversing rachet mechanism in the head has convenient thumb articulation and a range of 1-20 Nm. The LCD readout makes it easy to know exactly where you are and can calculate Nm/kg, Nm/cm, inch/lbs and foot/lbs.

Portable bicycle pressure washer with three lances, custom waterproof bag, cleaning solution, Bike Protect, Drivetrain Cleaner and C3 Ceramic Lube. Water supply is required. - Includes 3 lances; 1 for bicycles, 1 for motorcycles (higher- pressure), 1 bespoke (adjustable higher presser) for heavy grime, custom waterproof dry bag carry case - Also includes snow foam lance for Muc-Off Nano Tech Bike Cleaner creating a thick snow foam for deep cleaning - Weight: 15lbs - Intended for use with cold water only

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

- digital torque wrench - 3-60 Nm - 3/4/5/6/8/10 mm allen key - T25/T30/T40 Torx - 1 x Phillips screwdriver - reversible ratchet (3/8")

- Crank Saver—Pedal thread repair and insert kit - Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

- Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Head rotates for clockwise and counter-clockwise torquing - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 20-100 Nm; precise to +/- 3% as per DIN EN ISO 6789-1:2017-07 - Very robust design with ergonomic 2-component handle suitable for right-hand use - For 9x12 mm interchangeable insert tools

- Press set for common frame and through axle hub bearing sizes - See wheelsmfg.com for full list of contents

Unior, Metal plate for 1693B, Shop Repair Stand, Base plate

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 3/8" square drive, reversible ratchet, 45 teeth - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 10-50 Nm; Precise to +/- 3% - Very robust design with ergonomic 2-component handle suitable for right-hand use

- For fixing bottom bracket threads on the frame or removes excess paint or dirt from threads - BSA standard - left & right thread tap 1.3/8 × 24 TPI - Includes: Reamer’s magnetic handle 1695.1/4BI or 1695.1/4BIUS, Reamer holder for 1697.2/4, Left & right tap BSA 1.3/8 × 24 TPI

The BBP-1.2 quickly and accurately installs bottom bracket bearings, cups and adapters into press fit bottom bracket shells. The complete set of precision-machined bushings matches up with most common bottom bracket cup dimensions. The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly. - The complete set of precision-machined bushings match up with most common bottom bracket cup dimensions - The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly - Magnetic quick-release design allows for fast installation and removal of tool - Organized in a convenient storage case - Compatible with bottom bracket shell widths from 68mm to 150mm 6 sets of precision-machined bushings (in 9 sizes) to fit these bottom bracket configurations: - 386EVO - BB30 - BB86 - BB90 - BB92 - BB95 - BB121 - BMX Mid - BMX Spanish - OSBB - PF41 - Press Fit 24 - PressFit GXP® - BBright™ Direct Fit - PF30 BBright™ Press Fit - Shimano® Press Fit - All Press Fit DUB®

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

- 11 speed compatible - Allows removal, installation and peening of rivets

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

- The toolbox is designed especially for bike tools; it’s made of heavy duty plastic and is waterproof and dustproof. - Features a hangout pallet that hooks to the holes on the front side of the case, allowing you to have all your tools at hand - 9 pockets that are designed to carry everything from pliers to open end wrenches - 44 pockets all together + storage under the pallet

Lower Leg Seal Driver Tool, 32,34,35,36,38,40mm Set

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size

- A torque wrench with adjustable range from 4-20Nm - Reversible ratcheting head - Bits are knurled to make insertion and removal easier - Includes the following hex bits 3 4 5 6 8 10 and T20 T25 and T30 Torx bits - Pro model also available which incl