Tools

Unior, Metal plate for 1693C, Shop Repair Stand, Base plate

Set includes all the most common tools to service your bike stored in a compact plastic toolbox inside two high quality foam trays, where each tool finds its place - Three-legged hex and torx wrench of all important sizes - Screw type chain tool, master Link pliers and chain wear indicator - Tools for removal and installation of cassette - Hollow tech bottom bracket wrench - Pocket wheel truing tool and round spoke wrench - Bike brake disc spreader - Rotor truing fork - Steel wire cutter - Flat and PH screwdriver - Set of two tire levers

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.

You know that $300 carbon bar you just bought? Don't guess when installing it. Know exactly. Topeak's D-Torq is a precision digital torque wrench made from hardened steel. It features an audible alarm when you start to over tighten. The reversing rachet mechanism in the head has convenient thumb articulation and a range of 1-20 Nm. The LCD readout makes it easy to know exactly where you are and can calculate Nm/kg, Nm/cm, inch/lbs and foot/lbs.

Portable bicycle pressure washer with three lances, custom waterproof bag, cleaning solution, Bike Protect, Drivetrain Cleaner and C3 Ceramic Lube. Water supply is required. - Includes 3 lances; 1 for bicycles, 1 for motorcycles (higher- pressure), 1 bespoke (adjustable higher presser) for heavy grime, custom waterproof dry bag carry case - Also includes snow foam lance for Muc-Off Nano Tech Bike Cleaner creating a thick snow foam for deep cleaning - Weight: 15lbs - Intended for use with cold water only

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

- digital torque wrench - 3-60 Nm - 3/4/5/6/8/10 mm allen key - T25/T30/T40 Torx - 1 x Phillips screwdriver - reversible ratchet (3/8")

- Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Head rotates for clockwise and counter-clockwise torquing - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 20-100 Nm; precise to +/- 3% as per DIN EN ISO 6789-1:2017-07 - Very robust design with ergonomic 2-component handle suitable for right-hand use - For 9x12 mm interchangeable insert tools

- Press set for common frame and through axle hub bearing sizes - See wheelsmfg.com for full list of contents

Unior, Metal plate for 1693B, Shop Repair Stand, Base plate

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 3/8" square drive, reversible ratchet, 45 teeth - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 10-50 Nm; Precise to +/- 3% - Very robust design with ergonomic 2-component handle suitable for right-hand use

- For fixing bottom bracket threads on the frame or removes excess paint or dirt from threads - BSA standard - left & right thread tap 1.3/8 × 24 TPI - Includes: Reamer’s magnetic handle 1695.1/4BI or 1695.1/4BIUS, Reamer holder for 1697.2/4, Left & right tap BSA 1.3/8 × 24 TPI

The BBP-1.2 quickly and accurately installs bottom bracket bearings, cups and adapters into press fit bottom bracket shells. The complete set of precision-machined bushings matches up with most common bottom bracket cup dimensions. The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly. - The complete set of precision-machined bushings match up with most common bottom bracket cup dimensions - The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly - Magnetic quick-release design allows for fast installation and removal of tool - Organized in a convenient storage case - Compatible with bottom bracket shell widths from 68mm to 150mm 6 sets of precision-machined bushings (in 9 sizes) to fit these bottom bracket configurations: - 386EVO - BB30 - BB86 - BB90 - BB92 - BB95 - BB121 - BMX Mid - BMX Spanish - OSBB - PF41 - Press Fit 24 - PressFit GXP® - BBright™ Direct Fit - PF30 BBright™ Press Fit - Shimano® Press Fit - All Press Fit DUB®

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- 11 speed compatible - Allows removal, installation and peening of rivets

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

- The toolbox is designed especially for bike tools; it’s made of heavy duty plastic and is waterproof and dustproof. - Features a hangout pallet that hooks to the holes on the front side of the case, allowing you to have all your tools at hand - 9 pockets that are designed to carry everything from pliers to open end wrenches - 44 pockets all together + storage under the pallet

Lower Leg Seal Driver Tool, 32,34,35,36,38,40mm Set

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size

- A torque wrench with adjustable range from 4-20Nm - Reversible ratcheting head - Bits are knurled to make insertion and removal easier - Includes the following hex bits 3 4 5 6 8 10 and T20 T25 and T30 Torx bits - Pro model also available which incl

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

- All the tools you will need to disassemble and reassemble DT Swiss ratchet and 3 pawl hubs

Thin Flange Bottom Bracket Socket Pro Kit These sockets are designed to create a tight grip on thin flange bottom brackets to avoid slipping while torquing cups into bike frames. These single-sided sockets are used for installing and removing 48.5mm 16-notch, 52mm 16-notch and 50mm 12-notch bottom bracket cups. The sockets have a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and threaded onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red Kit includes: (1) 1/2" UNC Threaded Rod (1) 1/2" Adjustable Press Stop (1)6806/29 Bearing Drift (1)6806 Bearing Drift (1) 24x37 Bearing Drift (1) Wheels MFG Thin Flange Bottom Bracket Socket for 48.5mm 16-notch pattern. (1) SRAM Thin Flange T47 Bottom Bracket Socket for 52mm 16-notch pattern. (1) Praxis Thin Flange T47 Bottom Bracket Socket for 50mm 12-notch pattern.

A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench

These taps are designed to work with our 1697 BSA BB tap set or our 1698 Italian BB tap set. If you have one or the other and need compatibility with the other type of thread, simply buy these taps and the corresponding tap holders and you'll be on your way.

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

These taps are designed to work with our 1697 BSA BB tap set or our 1698 Italian BB tap set. If you have one or the other and need compatibility with the other type of thread, simply buy these taps and the corresponding tap holders and you'll be on your way.

Joker Combination Wrench Set

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

Quick release system enables the mechanic to close the jaws by hand, at which point clamp already grips the seat post or frame with sufficient force to hold the bicycle in place. Rotate the handle and additional tension is applied to ensure firm grip - Clamp can grip tubes of any shape with diameter 22 to 60mm - Quick release button: used to release the jaws after initial tension release with the rotating handle - Height of the jaws is 70mm, works with smaller sizes of seat posts as well as with dropper posts - Compatible with all of Unior’s repair stands

Campagnolo UT-CN400 Chain Tool. - Used to install 12-speed and 13-speed Campagnolo chains

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

- Drift and over axle set for common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

The Modular T-Handle Kit provides an unparalleled combination of portability and functionality in a complete Hex and Torx wrench set. With removable lateral bars, mechanics can mix and match the driver sizes, plus tuck the entire kit into the most compact tool roll available. The multifunctional roll integrates with our Team Edition case or hangs from a pegboard. Features - Set of 10, color coded Hex and Torx wrenches in a compact roll: 7 Hex: 2, 2.5, 3, 4, 5, 6, 8/10mm. 3 Torx: T10, T25, T30. - Precision CNC machined tool bodies. - Compact length allows for lighter weight, portability, and appropriate torque applications for bicycles. - Knurled spinner sleeves on each wrench for convenient and fast driving/removal of fasteners. - 3mm and 5mm machined tapered ends for deep set hardware access. - 3-position sliding lateral bars – sliding allows for easier fit into hard-to-reach places. - Lateral bars can be completely removed for pen drive applications in tight spots and for compact storage. - Lateral bars and drivers can be swapped and combined to customize the set. - Tool roll included – highly compact for portability. - Adjustable G-hook closure for secure storage. - Tool roll is compatible with the Team Edition case – includes Velcro to secure to case. - Tool roll includes grommets to allow peg wall hanging.

The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges. Includes: - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes. - 8mm L Hex - Tire Lever Pair - Yellow - Cassette Lockring Socket - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Pro Travel Pedal Wrench w/ 24mm Socket Driver - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Pro Chain Whip with Integrated Fixed Gear Lockring Wrench - Toothbrush

The Wera 2go tool container is the ideal solution for individual and convenient tool transport thanks to its hook-and-loop fastener system and its compact size. The inner and outer hook-and-loop fastener zones ensure a maximum in terms of space utilization. This means that an incredible number of tools can fit in container. Wera 2go 2 ensures a low weight since only the tools really needed for the job are taken along. The robust and dimensionally stable material protects the tools carried against damage and moisture and enhances the service life of the tool container. The padded and width-adjustable shoulder strap and the snug fit of the container on the body mean that the container is easy and convenient to carry, hands-free. It comes with an individually adjustable hook-and-loop fastener partition for screwdrivers and other tools. - Wera 2go tool container with inner and outer hook-and-loop fastener zones - Individually configurable for greater mobility - Ideal also for the docking of Wera textile boxes and pouches equipped with hook-and-loop fastener zones - Easily packed and cleared out - Hands-free transport

- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

- Long ball end hexagon wrench, sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 mm - TX profile wrench, size T25 - Crank cap tool - Chain tool - Round spoke wrench - Set of two tire levers - Crosstip screwdriver PH0 - Pro Socket Handle - Chain wear indicator - Cassette wrench and Cassette lockring tool - 2-For-1 disc brake tool

- The smallest 1—6Nm adjustable torque value wrench with ratcheting head on the market allowing for ease of stow and even fits in a jersey pocket - Features reversible ratcheting head and speed sleeve bit holder - Includes 2, 2.5, 3, 4, 5, and 6 hex bits T10, T15, T20, and T25 Torx bits a #2 Phillips bit, one tire lever, and storage case

A part time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod

- Advance bottom bracket bearing extractor set - (1) BE-22mm, (1) BE-24mm, (1) BE-29mm, (1) BE-30mm, (1) Bearing Pusher, (1) 39mm sleeve, (1) 42mm sleeve, (1) 44mm sleeve, (1) receiver cup

The 37-piece SBS-3 from Park Tool is a comprehensive, shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs. The SBS-3 also includes flat-faced sockets in common sizes for work on suspension forks. Ideal for use with Park Tool torque wrenches, the 3/8" drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability.

- Premium combination ratcheting box-end/open end wrenches set. - Durable, forged steel construction features 6-point, 72-tooth ratcheting mechanism. - Includes: 8, 9, 10, 11, 12, 13, 14, and 15mm sizes in storage pouch. The Pedro's Ratcheting Combo Wrench Set features beautiful, compact, and durable spanner wrenches. The forged and polished wrenches feature a convenient combination of six point, 72-tooth ratchet box-end and offset open-end. Backed by Pedro's lifetime warranty.

The Headset and Bearing Press is a professional quality tool designed to precisely and accurately install 1", 1-1/8", 1-1/4", and 1.5" headsets as well as most press-fit bottom brackets. Features include removable, 33cm, ergonomic handles, a precision roller thrust bearing for smooth low-effort pressing, a quick release lower press module for fast tool positioning and removal, and an extensive working range from 60mm to 320mm for ultimate versatility. Two sets of adapters are included with the press. Two Stepped Cup Bushings are sized to fit most 1" and 1-1/8" standard headset cups and nest into press plates ensuring precise alignment. Two 22mm ID Shim Adapters ensure precision alignment of any brand-specific cup bushings designed with 22mm inside diameter. A complete set of compatible press fit bottom bracket bushings is available separately. - 60 to 320mm working range with quick release lower press, precision roller thrust bearing, and removable handles - Includes two stepped cup bushings that fit most 1" and 1-1/8" standard headset cups - Includes two 22mm ID shim adaptors to ensure precision alignment of any brand-specific cup bushings designed with 22mm ID

6- 25L bits w/holder, size: Phillips 1 & 2mm, Slotted 5 & 7mm, Torx 25 & 30mm. 3- 1/4”Dr. socket size:8 /9/10mm 1- Couple 1- L handle 3- Steel core tire levers 2- Hub cone spanner.13*14*15*16mm 1- Crank installation tool 1- Chain rivet extractor chain-shaped.lost-wax casting, for 8, 9, 10 speed chain, with 1 spare pin 1- BB wrench for use Shimano® Hollowtech & Truvativ® GXP® & FSA®, Campagnolo® 1- Freewheel turner(for 9 speed chains) 1- Headset wrench(32*36mm) 1- 15mm pedal wrench and 14*15mm box wrenches 1- Chainring nut wrench.w/crank cover wrench 1- 2 in 1 crank tool.for standard square type & Shimano splined octalink and ISIS 1- Cartridge B.B. tool for Shimano® cartridge B.B. & ISIS drive compatible. 1- B-shaped spoke wrench, size: 3.2/3.3/3.5/4.0 mm 1- Double-ended wrench 8*10mm 6- Hex key wrenches 2/2.5/3/4/5/6mm 1- 8mm hex key & 1/2”Dr. adaptor 1- Freewheel remover 1- Blow case

17-piece set in a robust textile box. The integrated ratchet with fine toothing ensures fast and safe working Reversing lever for comfortable clockwise/counterclockwise direction change Fatigue-free working Rapidaptor bit holding screwdriver For bits with 1/4" external hexagon drive Fast-rotating sleeve for extremely high working speed 17 pieces Kit includes: 416 RA T-handle bit-holding screwdriver Rapidaptor Phillips 89mm long bits (PH 2, PH 3) Pozidriv 89mm long bits (PZ 2 PZ 3) TORX 89mm long bits: TX 10, 15, 20, 25, 30, 40 Hex-Plus 89mm long bits: 3, 4, 5, 6, 8 Flat 89mm long bits: 5.5 x 89 mm Textile Box

Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling with unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Convenient direction change thanks to switchover lever - Extremely slim ratchet with long lever - Return angle of only 5 degrees - Take-it-easy tool finder: color coding by size

Another indispensable tool for the professional bike shop. The hub bearing press pro kit works with bearings that have an i. D. Of 10mm or smaller (most front hub sealed bearing fall in this range). Installs sealed bearing sizes : - 6801 - 6802 - 6803 - 6900 - 6901 - R6 - 688 - 608 - 609 All parts are laser etched for easy identification. Formally press-2 includes: - 608 open bore 5mm x 2 - 608 over axel 5mm x 2 - 609 open bore 5mm x 2 - 609 over axel 5mm x 2 - 688 open bore 5mm x 2 - 688 over axel 5mm x 2 - 6801 open bore 5mm x 2 - 6801 over axel 5mm x 2 - 6802 open bore 5mm x 2 - 6802 over axel 5mm x 2 - 6803 open bore 5mm x 2 - 6803 over axel 5mm x 2 - 6900 open bore 5mm x 2 - 6900 over axel 5mm x 2 - 6901 open bore 5mm x 2 - 6901 over axel 5mm x 2 - R6 over axel 5mm x 2 - Rear QR skewer All parts are laser etched for easy identification.

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P